您在這裡

Jotunheim (balanced DAC) (已停售)

Jotunheim (balanced DAC) (已停售)
產品介紹

DAC/Amps: They’re Sooooo Last Decade
Don’t get stuck with dumpster fodder when DAC technology changes—choose Jotunheim and be ready for today…and the future. Configure Jotunheim to your needs: use it as just an amp, or add an internal DAC or phono preamp. In the future, you’ll be able to easily upgrade to a different module—maybe even something beyond a DAC or phono preamp.
 
Ready For Any Headphone
IEMs? Sure. HE-6? Sure. If this means nothing to you, just be confident that you can plug any headphone into Jotunheim and get great sound, with ultimate power and authority. Balanced or single-ended—it doesn’t matter. With 5W output into 32 ohms from the balanced outputs, Jotunheim has tons of power to spare.
 
Ready for Any Powered Monitor or Power Amp
Balanced and single-ended preamp outs mean that Jotunheim is ready for any powered desktop monitor—or to plug into those gigadollar monoblocks you’ve been eyeing. 
 
Unrivaled Flexibility
Select high or low gain with the flick of a front-panel switch, for compatibility with both easy-to-drive and hard-to-drive headphones. Select balanced input, single-ended input, and an optional DAC, phono, or input module:
AK4490 DAC Module. Jotunheim’s optional DAC module uses two AK4490 DACs in a hardware-balanced configuration, with a passive-filtered output stage and asynchronous USB Gen 2 input. Add it to Jotunheim for a true “best of both worlds” amp and DAC. 
MM Phono Input Module. Or, choose the optional MM phono input module, for 42dB of gain and exceptional low-noise performance from a phono stage with fully passive RIAA, for great phono sound right on your desk.

產品規格

Amplifier:
Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-700KHz, -3dB
Balanced Headphone Output:
Maximum Power, 16 ohms: 7500mW
Maximum Power, 32 ohms: 5000mW
Maximum Power, 50 ohms: 3000mW
Maximum Power, 300 ohms: 900mW
Maximum Power, 600 ohms: 500mW
Single-Ended Headphone Output:
Maximum Power, 16 ohms: 2500mW
Maximum Power, 32 ohms: 1500mW
Maximum Power, 50 ohms: 800mW
Maximum Power, 300 ohms: 350mW
Maximum Power, 600 ohms: 175mW
THD: <0.001%, 20Hz-20KHz, at 1V RMS
IMD: <0.0015%, CCIR
SNR: >109db, A-weighted, referenced to 1V RMS
Crosstalk: >-70dB, 20 Hz-20KHz
Output Impedance: Less than 0.1 ohms, balanced or SE, at both gain settings
Gain: 2 (6dB) or 8 (14dB), selectable via front switch
Inputs: Balanced XLR and Single-Ended RCA, selectable via front switch
Outputs: Balanced headphone (4-pin XLR), single-ended headphone (1/4” TRS), balanced line preamp, single-ended line preamp
Optional Inputs: AK4490 Balanced USB DAC or Passive MM Phono
Gain Stage: Proprietary Schiit Pivot Point™ fully discrete differential current-feedback topology
Power Supply: One 48VA transformer with 6 stages of discrete or integrated regulation and over 70,000uF total filter capacitance

Optional Dual AK4490 DAC:
USB Input Receiver: C-Media CM6631A
D/A Conversion IC: AK4490 x 2
Analog Output: fully differential, passive summing and passive filtering
Frequency Response: 20Hz-20KHz, +/-0.1dB, 2-100kHz, -3dB
Maximum Output: 2.0V RMS
THD: <0.0015%, 20Hz-20KHz, full scale
IMD: <0.002%, CCIR
S/N: >106dB, referenced to 2V RMS, unweighted
 
Optional Passive Filtered Phono Stage:
Gain: 42dB
THD: <0.01%, A-weighted, at 1V RMS
SNR: >80dB, A-weighted, inputs shorted
Crosstalk: -70dB, 20-20kHz
Sensitivity: 2.3mV for 400mV output
Overload Margin: >20dB
Input Impedance: 47k ohms 
Input Capacitance: 100pf
RIAA Accuracy: +/- 0.25dB, 20-20kHz
Topology: Fully passive RIAA network with AD8599 gain stages and PET film capacitors throughout, DC coupled, with DC servo
 
Power Consumption: 25W typical
Size: 9” x 6” x 2”
Weight: 6 lbs

定價:
22.000
售價:

販售商品皆為代理商公司貨,購買商品時會附上代理商的保固卡或保證書。

也請您詳細閱讀保固內容,以便瞭解自己的權益。

商品的保固期限自購買日 算起,視代理商的保固期限有一年或是兩年保固。