原廠連結

音悅音響為Corda台灣地區代理商

保固條約:
Meier Audio之耳擴品牌Corda享有原廠兩年保固。音悅音響提供第一年內免費保固維修,我們將會全權為您處理,您不需負擔任何費用。第一年後至第二年間的保固維修,客戶僅需負擔寄回德國原廠維修的運費。



Corda全省經銷點

中區
音悅台中店 04-23148138

南區
志達企業行 07-2386363



 隨身型耳擴 -->Corda
PCSTEP BK
PCSTEP是一台隨身型的耳擴,除了擁有類輸入外,也內建了USB DAC。 將他連接到電腦之後,他將大幅提升電腦音效的表現。PCSTEP擁有精密的音量控制(32段,兩段增益可調)。這個音量控制並非一般工業用規格,而是使用了一組低耗能的ADC,再運用此ADC的輸出來調節音量,他所得到的是一個非常乾淨而富於細節的聲音,並且沒有任何的聲道不均衡狀況。

Technical details
Measures: 8.9 x 6.6 x 2.2 cm
Weight without battery: 115 gr.
Supply voltage: 6 .. (9) .. 15 Volts DC
Mean current uptake: 20mA
Discrete volume control. Typical stepsize 1.5 dB, 31 steps.
Maximal amplification: -2 / 14 dB (low/high gain)
Star-grounding and ultra short signal paths.
Input impedance: 120 / 19 kOhm
Output impedance: < 1 Ohm
The unit runs from a single 9V battery, 5V USB-power, or an external powersupply (with upto 15V). Internally the supply voltage is doubled to increase driving capacity.
External noise is removed by extensive LC-filtering of the supply voltage.
The total buffer capacity is 1700 uF to lower the effective battery impedance.
For amplification two single OPA209 opamps are used for maximal sonic performance.(No dual or quad-opamps!)
The 3.5 mm sockets are silver-plated.
Inside the signal path only metal-resistors and high-quality film-capacitors are used (polypropylene).
The enclosure is made entirely of aluminium.
Accessories: 2 mini-mini interconnects (goldplated)
USB-cable
tool to open the amp

定價:9000   售價:7800  
PCSTEP SV
PCSTEP是一台隨身型的耳擴,除了擁有類輸入外,也內建了USB DAC。 將他連接到電腦之後,他將大幅提升電腦音效的表現。PCSTEP擁有精密的音量控制(32段,兩段增益可調)。這個音量控制並非一般工業用規格,而是使用了一組低耗能的ADC,再運用此ADC的輸出來調節音量,他所得到的是一個非常乾淨而富於細節的聲音,並且沒有任何的聲道不均衡狀況。

Technical details
Measures: 8.9 x 6.6 x 2.2 cm
Weight without battery: 115 gr.
Supply voltage: 6 .. (9) .. 15 Volts DC
Mean current uptake: 20mA
Discrete volume control. Typical stepsize 1.5 dB, 31 steps.
Maximal amplification: -2 / 14 dB (low/high gain)
Star-grounding and ultra short signal paths.
Input impedance: 120 / 19 kOhm
Output impedance: < 1 Ohm
The unit runs from a single 9V battery, 5V USB-power, or an external powersupply (with upto 15V). Internally the supply voltage is doubled to increase driving capacity.
External noise is removed by extensive LC-filtering of the supply voltage.
The total buffer capacity is 1700 uF to lower the effective battery impedance.
For amplification two single OPA209 opamps are used for maximal sonic performance.(No dual or quad-opamps!)
The 3.5 mm sockets are silver-plated.
Inside the signal path only metal-resistors and high-quality film-capacitors are used (polypropylene).
The enclosure is made entirely of aluminium.
Accessories: 2 mini-mini interconnects (goldplated)
USB-cable
tool to open the amp

(動態展示中)定價:-   售價:call  
STEPDANCE

Technical details

Measures: 9.1 x 6.5 x 2.8 cm
Weight without battery: 150 gr.
Supply voltage: 6 .. (9) .. 15 Volts DC
Mean current uptake: 50 mA / 25mA
(high/low-current-consumption-mode)
Discrete volume control. Typical stepsize 1.5 dB, 31 steps.
Maximal amplification: 5 / 16 dB (low/high gain)
(Active) balanced headphone ground.
Star-grounding and ultra short signal paths.
Input impedance: 55 / 16 kOhm
Output impedance: < 1 Ohm

定價:15700   售價:call  
2STEPDANCE BK
Technical details

CORDA 2STEPDANCE
Measures: 8.9 x 6.6 x 2.2 cm
Weight without battery: 130 gr.
Supply voltage: 6 .. (9) .. 15 Volts DC
Mean current uptake: 35 mA / 20mA (high/low-current-consumption-mode)
Discrete volume control. Typical stepsize 1.5 dB, 31 steps.
Maximal amplification: 0 / 14 dB (low/high gain) Active balanced headphone ground.
Star-grounding and ultra short signal paths.
Input impedance: 120 / 17 kOhm
Output impedance: < 1 Ohm

定價:16200   售價:call  
2STEPDANCE SV
Technical details

CORDA 2STEPDANCE
Measures: 8.9 x 6.6 x 2.2 cm
Weight without battery: 130 gr.
Supply voltage: 6 .. (9) .. 15 Volts DC
Mean current uptake: 35 mA / 20mA (high/low-current-consumption-mode)
Discrete volume control. Typical stepsize 1.5 dB, 31 steps.
Maximal amplification: 0 / 14 dB (low/high gain) Active balanced headphone ground.
Star-grounding and ultra short signal paths.
Input impedance: 120 / 17 kOhm
Output impedance: < 1 Ohm

(動態展示中)定價:16200   售價:call  
QUICKSTEP BK
QUICKSTEP是一台在技術上異常講究的隨身耳擴。這款耳擴被設計的目的,是在隨身使用時達到最佳的音質,並盡量作到最小的體積與耗電量。
這款耳擴不僅運用了CORDA獨創主動式平衡接地的概念,同時也擁有精密的音量控制(32段,兩段增益可調)。這個音量控制並非一般工業用規格,而是使用了一組低耗能的ADC,再運用此ADC的輸出來調節音量,他所得到的是一個非常乾淨而富於細節的聲音,並且沒有任何的聲道不均衡狀況。 一般隨身耳擴的3.5插槽部分,常常是最脆弱的,但QUICKSTEP的3.5插槽卻非常耐用。另外,他也不會在輸入端對RF波起任何的反應,因此也可避免被手機所引發的RF波汙染音質

Technical details
Measures: 8.8 x 6.6 x 2.2 cm
Weight without battery: 115 gr.
Supply voltage: 6 .. (9) .. 15 Volts DC
Mean current uptake: 35 mA / 20mA (high/low-current-consumption-mode)
Discrete volume control. Typical stepsize 1.5 dB, 31 steps.
Maximal amplification: 0 / 14 dB (low/high gain)
Active balanced headphone ground.
Star-grounding and ultra short signal paths.
Input impedance: 120 / 17 kOhm
Output impedance: < 1 Ohm
The unit runs from a single 9V battery and internally the supply voltage is used to create a pair of +4.5 and -4.5V powerlines (low current consumption mode) or a pair of +9 and -9V powerlines (high current consumption mode).
External powersupplies can be connected with voltages between 6V and 15V DC. This supply voltage is internally doubled to create a pair of +6..+15V and -6..-15V powerlines.
Noise is removed by extensive LC-filtering of the supply voltage.
RF-noise (iPhone!!) is removed by extensive filtering of the input signal.
The total buffer capacity is 4700 uF to lower the effective battery impedance.
For amplification five single OPA209 opamps are used for maximal sonic performance.(No dual or quad-opamps!)
The heavy-duty (!!) 3.5 mm sockets are gold-plated.
Inside the signal path only metal-resistors and high-quality film-capacitors are used (polypropylene).
The enclosure is made entirely of aluminium.
Accessories: 2 mini-mini interconnects (goldplated)
tool to open the amp

(動態展示中)定價:-   售價:call  
QUICKSTEP SV
QUICKSTEP是一台在技術上異常講究的隨身耳擴。這款耳擴被設計的目的,是在隨身使用時達到最佳的音質,並盡量作到最小的體積與耗電量。
這款耳擴不僅運用了CORDA獨創主動式平衡接地的概念,同時也擁有精密的音量控制(32段,兩段增益可調)。這個音量控制並非一般工業用規格,而是使用了一組低耗能的ADC,再運用此ADC的輸出來調節音量,他所得到的是一個非常乾淨而富於細節的聲音,並且沒有任何的聲道不均衡狀況。 一般隨身耳擴的3.5插槽部分,常常是最脆弱的,但QUICKSTEP的3.5插槽卻非常耐用。另外,他也不會在輸入端對RF波起任何的反應,因此也可避免被手機所引發的RF波汙染音質

Technical details
Measures: 8.8 x 6.6 x 2.2 cm
Weight without battery: 115 gr.
Supply voltage: 6 .. (9) .. 15 Volts DC
Mean current uptake: 35 mA / 20mA (high/low-current-consumption-mode)
Discrete volume control. Typical stepsize 1.5 dB, 31 steps.
Maximal amplification: 0 / 14 dB (low/high gain)
Active balanced headphone ground.
Star-grounding and ultra short signal paths.
Input impedance: 120 / 17 kOhm
Output impedance: < 1 Ohm
The unit runs from a single 9V battery and internally the supply voltage is used to create a pair of +4.5 and -4.5V powerlines (low current consumption mode) or a pair of +9 and -9V powerlines (high current consumption mode).
External powersupplies can be connected with voltages between 6V and 15V DC. This supply voltage is internally doubled to create a pair of +6..+15V and -6..-15V powerlines.
Noise is removed by extensive LC-filtering of the supply voltage.
RF-noise (iPhone!!) is removed by extensive filtering of the input signal.
The total buffer capacity is 4700 uF to lower the effective battery impedance.
For amplification five single OPA209 opamps are used for maximal sonic performance.(No dual or quad-opamps!)
The heavy-duty (!!) 3.5 mm sockets are gold-plated.
Inside the signal path only metal-resistors and high-quality film-capacitors are used (polypropylene).
The enclosure is made entirely of aluminium.
Accessories: 2 mini-mini interconnects (goldplated)
tool to open the amp

定價:-   售價:call